Parts & Accessories

Items: 139 of 39, per page
Drop items here to shop
Product has been added to your cart
  • Drag and drop me to the cart
    Replacement wrench for removing canisters from housing.
    • $9.25

    Not rated yet
    46
  • Drag and drop me to the cart
    The drinking water kit will provide constant drinking water form your RO. The kit includes a 4 gallon pressure tank, bar faucet, drain saddle and all the necessary fittings.
    • $139.95

    Not rated yet
    699
  • Drag and drop me to the cart
    The RP50 is designed for use with all RO systems up to 75 gallons per day to increase the incoming water pressure for tap water pressures that are too low for optimal RO performance. This pump will add about 50 psi to the current pressure.
    • $119.75

    Not rated yet
    598
  • Drag and drop me to the cart
    The RP100 is designed for use with all RO systems up to 200 gallons per day to increase the incoming water pressure for tap water pressures that are too low for optimal RO performance. This pump will add about 50 psi to the current pressure.
    • $145.75

    Not rated yet
    728
  • Drag and drop me to the cart
    The Flush Kit enables the membrane to be flushed with pressurized water to help remove contaminate buildup and extend membrane life. This kit comes complete with all necessary fittings to hook up to all RO systems.
    • $28.35

    Not rated yet
    141
  • Drag and drop me to the cart
    Transforms any full size R/O Unit into a RODI unit to produce higher quality water than standard R/O unit. It's small, compact and is easy to install. Removes more silicates from the water.
    • $69.95

    Not rated yet
    349
  • Drag and drop me to the cart
    Transforms any full size R/O Unit into a RODI unit to produce higher quality water than standard R/O unit. It's small, compact and is easy to install.
    • $64.95

    Not rated yet
    324
  • Drag and drop me to the cart
    Garden hose fitting to feed RO or RODI
    • $7.35

    Not rated yet
    36
  • Drag and drop me to the cart
    Standard faucet fitting to feed RO or RODI
    • $10.45

    Not rated yet
    52
  • Drag and drop me to the cart
    Pierces copper water pipe to feed RO or RODI units
    • $7.90

    Not rated yet
    39
  • Drag and drop me to the cart
    Saddle Valve to allow running RO waste line directly to drain pipe. Requires drilling a hole in the pipe
    • $5.99

    Not rated yet
    29
  • Drag and drop me to the cart
    Tubing for all RO & RODI units. Sold by 10 ft sections
    • $2.00

    Not rated yet
    10
  • Drag and drop me to the cart
    Tubing for all RO & RODI units. Sold by 10 ft sections
    • $2.00

    Not rated yet
    10
  • Drag and drop me to the cart
    Tubing for all RO & RODI units. Sold by 10 ft sections
    • $2.00

    Not rated yet
    10
  • Drag and drop me to the cart
    O-ring for Clear R/O Canister
    • $8.39

    Not rated yet
    41
  • Drag and drop me to the cart
    Tubing for all RO & RODI units. Sold by 10 ft sections
    • $2.00

    Not rated yet
    10
  • Drag and drop me to the cart
    Single canister add-on that can be used by itself or used as a pre-filter or post filter on any RO unit. DOES NOT COME WITH TUBING OR FITTINGS
    • $28.90

    Not rated yet
    144
  • Drag and drop me to the cart
    20" Clear R/O Canister w/fittings
    • $59.90

    Not rated yet
    299
  • Drag and drop me to the cart

    2.5" x 20" Carbon Cartridge 10 Micron

    • $37.90

    Not rated yet
    189
  • Drag and drop me to the cart

    2.5" x 20" Sediment Cartridge 1 Micron

    • $29.90

    Not rated yet
    149
  • Drag and drop me to the cart
    Quick Connect 1/4" "T" Fitting
    • $6.19

    Not rated yet
    30
  • Drag and drop me to the cart
    Quick Connect 1/4" "Y" Diverter
    • $4.15

    Not rated yet
    20
  • Drag and drop me to the cart
    Qucik Connect 1/4" x 1/4" NPTF Male Elbow
    • $4.15

    Not rated yet
    20
  • Drag and drop me to the cart
    Qucik Connect 1/4" x 1/8" NPTF Male Elbow
    • $4.15

    Not rated yet
    20
  • Drag and drop me to the cart
    Quick Connect 1/4" x 1/4" NPTF Male Straight
    • $4.15

    Not rated yet
    20
  • Drag and drop me to the cart
    Quick Connect 1/4" Ball Valve
    • $8.39

    Not rated yet
    41
  • Drag and drop me to the cart
    Quick Connect 1/4" Check Valve
    • $9.45

    Not rated yet
    47
  • Drag and drop me to the cart

    The float valve can be attached to any storage tank to automatically shut off the supply to the tank. Use with an hydraulic automatic shut off to shut down your system and stop producing waste water when the tank is full.

    • $21.90

    Not rated yet
    109
  • Drag and drop me to the cart
    The Pressure Gauge Kit installs in line before the RO membrane and measures the incoming water pressure. This will insure that you are getting the correct psi for optimal efficiency of your filter.
    • $24.99

    Not rated yet
    124
  • Drag and drop me to the cart

    High Pressure Automatic Shutoff (ASO) Valve.

    ***Sold asa kit,This product will only work when used in conjunction with a check valve (Back flow preventer, Included in kit)***

    Works with any R/O or RO/DI Unit

    This High Pressure ASO is designed to shut off at 60% of line pressure and has built-in ports for 1/4" polyethylene tubing connections.This unit is tested and certified by the WQA Gold Seal program against NSF/ANSI 58 standards.

    Eliminate ASO chatter

    Will shut down RO unit in fraction of time vs. traditional ASO's

    • $39.90

    Not rated yet
    199
  • Drag and drop me to the cart
    The NH2CL (Chloramine) Blaster upgrade kit, will remove the chlorine + ammonia also known as chloramines before passing through the reverse osmosis membrane, therefore extending the life of your membranes and deionization (DI) filters. Our NH2CL Blaster filters also have a longer life span then the standard carbon block.

    The NH2CL (Chloramine) blasterworkseffectively only when run in series to allow enough contact time with the water, that is why an extra canister is provided. To install this upgrade:

    • You transfer your first sediment filter into the single canister provided
    • Discard your current carbon block, and place the 2 NH2CL Filters in the 2 empty canisters on your system.
    • Use the provided tube to connect the single canister with sediment filter to the beggining of your system, and
    • Connect the feed line to the sediment filter.
    • $64.90

    Not rated yet
    324
  • Drag and drop me to the cart
    • $83.95

    Not rated yet
    419
  • Drag and drop me to the cart

    The DM-1 is consumer friendly monitor measuring feed (input) water vs. product (output) water of a water filtration system at any time. This device is ideal for Reverse Osmosis (RO), Deionized water (DI) filtration systems that work well in variety of application such as drinking or potable water, Aquariums, Hydroponics and many more.

    • $39.95

    Not rated yet
    199
  • Drag and drop me to the cart

    With its rugged design and build, the TDS-3 is an ideal meter (tool) that can be used for any application; Ranging from water purification, to hydroponics to industrial waste water treatment. It comes with a black vinyl carrying case, protecting it when carried in a toolbox.

    • $15.95

    Not rated yet
    79
  • Drag and drop me to the cart
    IceCap Magnetic Mount Float Valve comes with universal tubing retainer and tubing
    • $34.99

    Not rated yet
    30
  • Drag and drop me to the cart

    Prevent floods by adding the super-easy-to-install Flood Guardian to your RO or RO/DI System. Never worry about forgetting to turn off your RO/DI system or overfilling your reservoir again! Simply mount the magnetically-mounted sensor to any reservoir/bucket/jug and the water will stop once the reservoir is filled. No drilling is required and there is no unreliable float valve to fail. Our proprietary dual-optical sensor provides unparallel security. Additionally, there is no frustrating pressure solenoid to install: the electronic solenoid kit installs in seconds.

    • $69.99

    Not rated yet
    349
  • Drag and drop me to the cart

    4" x 20" Sediment Cartridge 1 Micron

    • $27.90

    Not rated yet
    139
  • Drag and drop me to the cart

    4" x 20" Carbon Cartridge 10 Micron

    • $89.99

    Not rated yet
    449
  • Drag and drop me to the cart

    The DM-2 is a commercial grade monitor measuring TDS feed (input) water vs. product (output) water of a water filtration system at any time. With its shielded cables and diagnostic messaging this robust device is ideal for Reverse Osmosis (RO), Deionized water (DI) filtration systems that work well in applications such as drinking or potable water, Water treatment, Aquariums, Hydroponics and many more.

    • $42.99

    Not rated yet
    214
Sign up for Champion Lighting & Supply news