My Reef Creations

2% OFF!

Drag and drop me to the cart

My Reef Creation Recirculating Skimmers are available from the MR-2R through the commercial line. Each have a minimum of 2 becketts and are made of 3/8" or 1/2" blue cell cast acrylic. Both becketts are plumbed together and have the same standard features as the regular MRC skimmers...silencers, true needle valve air intake, spears unions and plumbing parts, cell cast acrylic, threaded large gate valves, and removable becketts.

Choose your feed pump based on how many times you want to turn your water volume over through the skimmer. Typical turnover should be 1.5-2 times your water volume over per hour. For example a 300 gallon tank may use a 600 GPH feed pump, which will give maximum tank water recirculated water turnover.

Skimmer Dimensions	MR-2R
Box Dimensions	10"x10"
First Riser OD	6"
Second Riser OD	4 1/2"
Number of Injectors	2
Gate Valve (standard)	1 1/2" Threaded
Recirculation input	3/4" bulkhead
Pump input	1" Bulkhead
Total Height	26 1/2"
Rating	450 gallons
Recommended Pump	BL-40, BL-55
Recommended Feed pump	300-900 GPH

Drag and drop me to the cart

MRC MR-3R Recirculating Protein Skimmer

My Reef Creation Recirculating Skimmers are available from the MR-2R through the commercial line. Each have a minimum of 2 becketts and are made of 3/8" or 1/2" blue cell cast acrylic. Both becketts are plumbed together and have the same standard features as the regular MRC skimmers...silencers, true needle valve air intake, spears unions and plumbing parts, cell cast acrylic, threaded large gate valves, and removable becketts.

Choose your feed pump based on how many times you want to turn your water volume over through the skimmer. Typical turnover should be 1.5-2 times your water volume over per hour. For example a 300 gallon tank may use a 600 GPH feed pump, which will give maximum tank water recirculated water turnover.

Skimmer Dimensions	MR-3R
Box Dimensions	10"x10"
First Riser OD	6"
Second Riser OD	41/2"
Number of Injectors	2
Gate Valve (standard)	1 1/2" Threaded
Recirculation input	3/4" Bulkhead
Pump input	1" Bulkhead
Total Height	32 1/2"
Rating	600 gallons
Recommended Pump	BL-55
Recommended Feed pump	500-1000 GPH

4% OFF!

Drag and drop me to the cart

MRC MR-6R Recirculating Protein Skimmer

My Reef Creation Recirculating Skimmers are available from the MR-2R through the commercial line. Each have a minimum of 2 becketts and are made of 3/8" or 1/2" blue cell cast acrylic. Both becketts are plumbed together and have the same standard features as the regular MRC skimmers...silencers, true needle valve air intake, spears unions and plumbing parts, cell cast acrylic, threaded large gate valves, and removable becketts.

Choose your feed pump based on how many times you want to turn your water volume over through the skimmer. Typical turnover should be 1.5-2 times your water volume over per hour. For example a 300 gallon tank may use a 600 GPH feed pump, which will give maximum tank water recirculated water turnover.

Skimmer Dimensions	MR-6R
Box Dimensions	12"x12"
First Riser OD	8"
Second Riser OD	4 1/2"
Number of Injectors	2
Gate Valve (standard)	1 1/2" Threaded
Recirculation input	3/4" Bulkhead
Pump input	1"
Total Height	48"
Rating	1450
Recommended Pump	BL-100, SEQ Barracuda
Recommended Feed pump	1200-1800 GPH

Drag and drop me to the cart

MRC Waste Collector WC-E for Orca Pro Skimmers

Drag and drop me to the cart

MRC Waste Collector WC-2

Waste collector are a separate chamber that can be attached to your protein skimmer to catch overflow waste and skimmate.

Waste Collectors
Waste Container allows your protein skimmer to shut off when the container becomes full. Shuts the air flow off to your skimmer, thus not allowing the container to overflow and cause a mess on your floor. Easily disconnects to empty and clean and re-use. Has a 1/2" hose barb connection to fit most brand of skimmer.

Why you need it & how it works:
Adding a waste collector is a must, especially if you're leaving home for a few days, or just want to keep your bases covered during periods of high stress. An MRC waste collector will catch the spill over by cutting the air flow when your skimmer gets too full. It then stores the extra waste in its clear reservoir until you get back. Very convenient and practical for vacations as well as extended every day use.

Why buy MRC waste collectors:
MRC waste collectors come in several ready-to-go sizes, or you can custom order your own, as with any of our products. We use only cast acrylic materials for the body and o-rings for a leak free seal, so you can be sure you're getting the finest MRC quality and service.

WC-1	4 1/2" x6" Tube .41 Gallon capacity
WC-2	4 1/2" x12" Tube .85 gallon capacity
WC-3	6"x6" Tube 3/4 gallon capacity
WC-4	6" x12 Tube 1.5 gallon capacity
WC-5	8"x18"Tube 4 gallon capacity

9% OFF!

Drag and drop me to the cart

MRC Waste Collector WC-4

Waste collector are a separate chamber that can be attached to your protein skimmer to catch overflow waste and skimmate.

Waste Collectors
Waste Container allows your protein skimmer to shut off when the container becomes full. Shuts the air flow off to your skimmer, thus not allowing the container to overflow and cause a mess on your floor. Easily disconnects to empty and clean and re-use. Has a 1/2" hose barb connection to fit most brand of skimmer.

Why you need it & how it works:
Adding a waste collector is a must, especially if you're leaving home for a few days, or just want to keep your bases covered during periods of high stress. An MRC waste collector will catch the spill over by cutting the air flow when your skimmer gets too full. It then stores the extra waste in its clear reservoir until you get back. Very convenient and practical for vacations as well as extended every day use.

Why buy MRC waste collectors:
MRC waste collectors come in several ready-to-go sizes, or you can custom order your own, as with any of our products. We use only cast acrylic materials for the body and o-rings for a leak free seal, so you can be sure you're getting the finest MRC quality and service.

WC-1	4 1/2" x6" Tube .41 Gallon capacity
WC-2	4 1/2" x12" Tube .85 gallon capacity
WC-3	6"x6" Tube 3/4 gallon capacity
WC-4	6" x12 Tube 1.5 gallon capacity
WC-5	8"x18"Tube 4 gallon capacity

Drag and drop me to the cart

MRC Waste Collector WC-5

Waste collector are a separate chamber that can be attached to your protein skimmer to catch overflow waste and skimmate.

Waste Collectors
Waste Container allows your protein skimmer to shut off when the container becomes full. Shuts the air flow off to your skimmer, thus not allowing the container to overflow and cause a mess on your floor. Easily disconnects to empty and clean and re-use. Has a 1/2" hose barb connection to fit most brand of skimmer.

Why you need it & how it works:
Adding a waste collector is a must, especially if you're leaving home for a few days, or just want to keep your bases covered during periods of high stress. An MRC waste collector will catch the spill over by cutting the air flow when your skimmer gets too full. It then stores the extra waste in its clear reservoir until you get back. Very convenient and practical for vacations as well as extended every day use.

Why buy MRC waste collectors:
MRC waste collectors come in several ready-to-go sizes, or you can custom order your own, as with any of our products. We use only cast acrylic materials for the body and o-rings for a leak free seal, so you can be sure you're getting the finest MRC quality and service.

WC-1	4 1/2" x6" Tube .41 Gallon capacity
WC-2	4 1/2" x12" Tube .85 gallon capacity
WC-3	6"x6" Tube 3/4 gallon capacity
WC-4	6" x12 Tube 1.5 gallon capacity
WC-5	8"x18"Tube 4 gallon capacity

Drag and drop me to the cart

MRC Injector Seal Kit

Replacement o-rings & gasket for MRC skimmer injectors