Won Pro Heat D-1500 Controller
Zoom image

Won Pro Heat D-1500 Controller


Not rated yet
Pro Heat D-1500 Controller
  • Can be used both Heating and / or Cooling mode

  • 2 separate digital display : water / set temperature

  • Dual scale display: F or C

  • Precision 1.8F / 1C

  • Max Safe output: 1500 Watts

  • Measurement range: 37 F to 150 F (3 C to 70 C)

  • Control range 34 F to 93 F (1 C to 34 C)

  • Auto electronic control

  • Ideal for aquarium, pond, electro plating, industrial field

  • Over heating alarm sound

  • Easy to changeable sensor (probe)

d1500disc.jpg

Disconnected shape of plug in type probe cable:

Very easy to disconnect the probe or replace new probe from remote place

d1500sensor.jpg

Probe (sensor) & its function:

This probe detects the lower water level than probe's position. When water lever is lower than probe position electric power cuts off automatically to prevent over heating or fire. Clean the metal part of probe periodically to protect sensitivity.

d1500plug1.jpg

This receptacle on the controller can be used for 3 prong plug or 2 flat type plug or 2 round type plug

d1500plug.jpg

About D-1500 Controller

  • PH D-1500 controller that has 3 prong grounded receptacle can be used with the heater which has a 3 prong or 2 prong.

  • Equipped with a plug- in type remote temperature probe (sensor) that can be connected or disconnected very easily without replacing the entire controller in case of need to replace a new probe.

  • The probe has designed for automatic electric power cut off function that can prevent overheating or fire which may happen accidentally when water level is lower than sensor position

  • The probe (sensor) must be placed (located) at the higher position than the location of heating tube in the tank to cut off electric power and to prevent over heating by the detection low water level when water in the tank has evaporated up to the sensor’s low water level detection point.

  • The probe (sensor) cord length is 6 feet long

  • When the attached sensor in the tank is out of water accidentally or malfunction and improper connection contact to the main controller electric power will be cut off immediately with warning sound and sign.

  • D-1500 controller displays the correct temperature with 1 F accuracy at the large LED display window.It is easy to read.

  • The memory chip in the controller will restore the previous temperature setting automatically when the electric power returns after failure.

  • All of the controllers show an actual water temperature and setting temperature

  • Setting mode push bottom makes easy to set temperature desired.

  • D-1500 can be calibrated when you need calibration to adjust on actual water temperature.

  • D-1500 temperature controller can be used for both heater and chiller operation by alteration of heating mode and/or cooling (chiller) mode.It can be operated for heating mode up to 1500 watt heater or for cooling mode up to HP chiller that does not equipped with controller.Displays temperature with the Fahrenheit or Celsius mode.

  • Ideal for aquarium, pond, electro-plating and industrial field.

  • Higher wattage controller can be used to operate up to the mentioned maximum wattages with low wattage multiple heaters without problem when using the rated extension cord strip to maximum wattages.

 

Out of stock
  • $84.90
You will earn up to 424 reward points after purchasing this product.
Add a different product to compare
Pro Heat D-1500 Controller
  • Can be used both Heating and / or Cooling mode

  • 2 separate digital display : water / set temperature

  • Dual scale display: F or C

  • Precision 1.8F / 1C

  • Max Safe output: 1500 Watts

  • Measurement range: 37 F to 150 F (3 C to 70 C)

  • Control range 34 F to 93 F (1 C to 34 C)

  • Auto electronic control

  • Ideal for aquarium, pond, electro plating, industrial field

  • Over heating alarm sound

  • Easy to changeable sensor (probe)

d1500disc.jpg

Disconnected shape of plug in type probe cable:

Very easy to disconnect the probe or replace new probe from remote place

d1500sensor.jpg

Probe (sensor) & its function:

This probe detects the lower water level than probe's position. When water lever is lower than probe position electric power cuts off automatically to prevent over heating or fire. Clean the metal part of probe periodically to protect sensitivity.

d1500plug1.jpg

This receptacle on the controller can be used for 3 prong plug or 2 flat type plug or 2 round type plug

d1500plug.jpg

About D-1500 Controller

  • PH D-1500 controller that has 3 prong grounded receptacle can be used with the heater which has a 3 prong or 2 prong.

  • Equipped with a plug- in type remote temperature probe (sensor) that can be connected or disconnected very easily without replacing the entire controller in case of need to replace a new probe.

  • The probe has designed for automatic electric power cut off function that can prevent overheating or fire which may happen accidentally when water level is lower than sensor position

  • The probe (sensor) must be placed (located) at the higher position than the location of heating tube in the tank to cut off electric power and to prevent over heating by the detection low water level when water in the tank has evaporated up to the sensor’s low water level detection point.

  • The probe (sensor) cord length is 6 feet long

  • When the attached sensor in the tank is out of water accidentally or malfunction and improper connection contact to the main controller electric power will be cut off immediately with warning sound and sign.

  • D-1500 controller displays the correct temperature with 1 F accuracy at the large LED display window.It is easy to read.

  • The memory chip in the controller will restore the previous temperature setting automatically when the electric power returns after failure.

  • All of the controllers show an actual water temperature and setting temperature

  • Setting mode push bottom makes easy to set temperature desired.

  • D-1500 can be calibrated when you need calibration to adjust on actual water temperature.

  • D-1500 temperature controller can be used for both heater and chiller operation by alteration of heating mode and/or cooling (chiller) mode.It can be operated for heating mode up to 1500 watt heater or for cooling mode up to HP chiller that does not equipped with controller.Displays temperature with the Fahrenheit or Celsius mode.

  • Ideal for aquarium, pond, electro-plating and industrial field.

  • Higher wattage controller can be used to operate up to the mentioned maximum wattages with low wattage multiple heaters without problem when using the rated extension cord strip to maximum wattages.

 

Customers who bought this product also bought
Drop items here to shop
Product has been added to your cart
  • Drag and drop me to the cart
    • $104.90

    Not rated yet
    524
    Add a different product to compare
Customers who viewed this product bought
  • Drag and drop me to the cart
    • $104.90

    Not rated yet
    524
    Add a different product to compare
  • Drag and drop me to the cart
    • $42.75

    Not rated yet
    213
    Add a different product to compare
  • Drag and drop me to the cart
    • $21.90

    Not rated yet
    109
    Add a different product to compare