Tunze

Recommended from 20 to 140 liters (5.3 to 37USgal.) of sea water.
Immersion depth: approx. 135mm to 155mm (5.3 to 6.1in.), skimmer cup volume: 0.2L (.053 USgal.), air capacity: approx. 100l/h (26USgal./h), 2.5W 115V/60Hz.
Dimensions: L110 x W63 x H215mm (L4.3 x W2.5 x H8.5in.), includes Magnet Holder for glass thickness of up to 10mm (3/8“).

Recommended, depending on tank load, from 60 to 250 litres (15 to 65 USgal.) of sea water.
Immersion depth: approx. 225mm to 245mm (8.86 to 9.65 in.), skimmer cup volume: 0.2L (.52 in.), air output: approx. 150l/h (40 US gal./h), 4W, 230V/50Hz (115V/60Hz), dimensions: L 110 x W 90 x H 305mm (L 4.3 x W 3.5 x H 12 in.), fixed by means of Magnet Holder up to a pane thickness of 12mm (0.47 in.).

Including reactor, to be used in DOC Skimmer 9011, 9016 and 9211. With 90 deg. angle and drain hose, diam. 40 mm x 40 cm (1.57 x 15.7 in.).

Recommended for salt water aquariums up to 1,000 liters (265 USgal.).
Immersion depth of 140 to 240 mm (5.5 to 9.5 in.), dimensions without post-filter: L250 x W180 x H415mm (L 9.8 x W 7.0 x H 16.3 in.), 230V/50Hz, 11W, water flow rate: 900l/h, (115V/60Hz, 15W, water flow rate: (237.7 US gal./h), water throughput: 600l/h (158.5 US gal./h, skimmer cup volume: 0.7 L (0.18 US gal.).

Mains connection: 230 V/50 Hz (115 V/60 Hz).
Cable: 2 m (78.7 in.).
Maximum air capacity: 600 l/h (160 US gal./h) at a water flow rate of 900 l/h (235 US gal./h).
Energy consumption: 11 W (15 W) at an air capacity of 600 l/h (158 US gal./h).
Motor winding with protective thermostat.
Pump outlet with in. BSP thread (NPT).
Pump housing with strainer and silencer.
Pump drive: Rotor with high-performance one-part magnet, with all-ceramic bearing.
Equipped with air regulation and silencer.

Recommended for aquariums up to 1,500 litres (400 USgal.) of salt water.
Immersion depth from 100 to 200 mm (3.9 to 7.9 in.) without setting.
Dimensions: L 350 x W 300 x H 440 mm (L 13.8 x W 11.8 x H 17.3 in.).
230 V / 50 Hz, 15 W, water flow rate: 1,100 l/h (290.6 US gal./h).
Air capacity: 850 l/h (224.5 US gal./h); skimmer cup volume: 2 l (.52 (USgal.).

Mains connection: 230 V/50 Hz (115 V/60 Hz), 2m cable.
Maximum air flow performance: 850 l/h (225 US gal./h) at a water flow rate of 1,300 l/h (340 US gal./h).
Power consumption: 15W with an air flow rate of 850 l/h (225 US gal./h), motor with protective thermostat.
Pump outlet with in. BSP thread (NPT).
Pump housing with strainer and silencer.
Pump drive: Rotor with high-performance one-part magnet, with a full-ceramic bearing.
Equipped with a coupling and silencer.

Recommended for aquariums up to 3,000 litres (800 USgal.) of salt water.
Immersion depth from 100 mm (3.9 in.) to 200 mm (7.9 in.) without setting.
Dimensions: L 350 x W 300 x H 490 mm (L 13.8 x W 11.8 x H 19.3 in.).
230 V / 50 Hz, 24 W (115 V / 60 Hz, 32 W), water flow rate: 1,600 l/h (422.7 US gal./h)
Air capacity: 1,100 l/h (290.6 US gal./h); skimmer cup volume: 2 l (.52 USgal.).

Mains connection: 230 V/50 Hz (115 V/60 Hz), 2m cable (78.7 in.).
Maximum air flow performance: 1.100 l/h (290 US gal./h) at a water flow rate of 2,300 l/h (600 US gal./h).
Power consumption: 24W (32W) at an air capacity of 1,100 l/h (290 US gal./h), motor with a protective thermostat.
Pump outlet with in. BSP thread (NPT).
Pump housing with strainer and silencer.
Pump drive: Rotor with high-performance one-part magnet, with a full-ceramic bearing.
Equipped with a coupling and silencer

The ComlineReefpack 250 features an optimum combination of technical filter components for seawater biotopes. It is designed to maintain near to natural conditions in sensitive seawater aquariums from 60 to 250 liters (15 to 65USgal.).

Mechanical and chemical filtration with ComlineFilter 3162, refillable with any type of filter medium.
Surface intake for removal of bacteria film, ground intake for heavy particles and sediments.
Loop current in aquarium by energy saving pump with variable performance from 250 to 850 l/h (70 to 250USgal./h).
Skimming with ComlineDOC Skimmer 9004, surface intake and high performance.
Storage tank 5002.100 with a volume of 13 liters (3.4USgal.), serves as reservoir for refill water.
Energy consumption of only 8.5 W for all components, 230V/50Hz (115V/60Hz).
Supplied ready for installation, including patented Magnet Holder up to a pane thickness of 12 mm (1/2"), storage tank and filter cotton. Dimensions including skimmer cup (L x W x H): 110 x 180 x 305 mm (4.3 x 7.1 x 12in.).

Avoids discharge of bubbles at the skimmer during the run-in-phase.

The ComlineReefpack 100 is an optimal combination of technical filtering components for nano seawater habitats. The goal is to operate a sensitive 30 to 100 liter (8 to 26 US gal.) seawater aquarium under conditions similar to nature.
Mechanical and chemical filtration with ComlineFilter 3161, refillable with any kind of filter media.
Skimming with the ComlineDOC skimmer 9001.
Storage tank: 5002.100: with a volume of 13 litres (3.4USgal.); is used to hold the refill water.
Power consumption: only 7 W for all components, 230V/50Hz (115V/60Hz).
Delivery form: Ready for mounting with a patented Magnet Holder up to a glass thickness of 10 mm (3/8 in.), storage reservoir and filter wool.

Recommended from 20 to 160 liters (5.3 to 42.3USgal.) of sea water.
Immersion depth: approx. 135 to 155 mm
(5.3 to 6.1in.)
Skimmer cup volume: 0.2 liters (.05 USgal.) Air capacity: approx. 150 l/h (39.6USgal./h), Energy consumption: approx. 5 W (max.8W)
Power supply unit: 100-240V / 50-60Hz
Cable length: 3 m (118.1 in.) up to the
Turbellecontroller
Dimensions (L x W x H): 110 x 63 x 215 mm
(4.3 x 2.5 x 8.5in.)
Includes Magnet Holder for glass thickness of up to 10 mm (3/8").

Recommended, depending on tank load, from 60 to
300 liters (15 to 79USgal.) of sea water.
Immersion depth: approx. 225 to 245 mm
(8.9 to 9.7in.)
Skimmer cup volume: 0.2 liters (.05in.)
Air capacity: approx. 200 l/h (52.8USgal./h), Energy consumption: approx. 5 W (max. 10 W)
Power supply unit: 100-240V / 50-60Hz
Cable length: 3 m (118.1 in.) up to the
Turbellecontroller
Dimensions (L x W x H): 110 x 90 x 305 mm
(4.3 x 3.5 x 12in.)
Magnet Holder up to a glass thickness of 12 mm (1/2").

Recommended for salt water aquariums up to
1,200 liters (317 US gal.).
Immersion depth from 140 to 240 mm (5.5 to 9.5 in.)
Dimensions without post-filter (L x W x H):
250 x 180 x 415 mm (9.8 x 7.0 x 16.3in.)
Water flow rate: adjustable up to 1,200 l/h
(317 US gal.)
Air flow performance: adjustable up to 750 l/h
(198 US gal./h)
Energy consumption: up to approx. 29 W
Power supply unit: 100-240V / 50-60Hz
Cable length: 3 m up to Turbellecontroller
Skimmer cup volume: 0.7 liters (0.18 US gal.)

Recommended for salt water aquariums up to
3,500liters (925USgal.).
Immersion depth from 100 to 200 mm (3.9 to 7.8 in.)
Water flow rate: adjustable up to 2,500l/h (660 US gal.)
Air flow performance: adjustable up to 1,800 l/h (476 US gal./h)
Energy consumption: up to approx. 38 W
Power supply unit: 100-240V / 50-60Hz
Cable length: 3 m up to Turbellecontroller
Skimmer cup volume: 2 liters (.5USgal.)
Dimensions of the skimmer cup including lid: 15 x H.218 mm (8.46" x H. 8.58")
Dimensions (L x W x H): 350 x 300 x 490 mm (13.8 x 11.8 x 19.3in.)
To be able to take off skimmer cup it must be raised by 71 mm (2.80") at least.