HYDROS

HYDROS Control 2 is a small, general-purpose device capable of performing all the main functions for your saltwater aquarium or freshwater tank. Monitor temperature, sense leaks, power equipment, control outlets, and more. 

HYDROS Control 2 is a small, general-purpose device capable of performing all the main functions for your saltwater aquarium or freshwater planted tank. Monitor temperature, leaks, and flow rates. Power equipment, control outlets, and more. 

Please note: CONTROL X3 ONLY - Nothing else is included.

What’s Included:

• 1x Control X3 Unit
• 1x Power Supply
• 1x Temperature Sensor
• 1x pH Probe & Calibration Solutions
• 1x 4-Outlet WiFi AC Power Strip
• HYDROS App

What’s Included:

• 1x Control X3 Unit
• 1x Power Supply
• 1x Temperature Sensor
• 1x pH Probe & Calibration Solutions
• 1x Point Leak Sensor
• HYDROS App

Use for saltwater aquariums, freshwater tanks, or even pond applications, this powerful controller is capable of performing all essential functions needed to maintain a healthy aquarium without the need for extra expensive modules.

The HYDROS Control 4 Starter Pack includes all the essential equipment needed to control and monitor an aquarium including its power supply, temperature sensor, pH probe with calibration fluids, and the HYDROS 4 Outlet WiFi Power Strip.

A HYDROS controller with 4 Universal ports dedicated to measuring aquarium parameters. Capable of monitoring temperature, sense leaks, control outlets, send alerts, and much more. 

Please note: CONTROL XS ONLY - Nothing else is included.

What's Included:

• 1x Control XS Unit
• 1x Power Supply
• 1x Temperature Sensor
• 1x 4-Outlet WiFi AC Power Strip
• HYDROS App

Full HYDROS Controller with eight controllable AC power outlets each with individual power monitoring capabilities to safely manage aquarium equipment that is critical to the life of the system.  This is for the Controller only but HYDROS PRO packs are also available.

Please note: CONTROL XP8 ONLY - Nothing else is included.

What’s Included in the X3 PRO Pack:

• 1x Control X3 Unit
• 1x Control XP8 Unit
• 1x Temperature Sensor
• 1x pH Probe & Calibration Solutions
• 1x 6ft Command Bus Cable with two Terminators
• HYDROS App

The HYDROS Control X4 PRO Pack includes the Control X4 & XP8 aquarium controllers, HYDROS App, temperature sensor, pH probe with calibration solutions, and 6ft Command Bus Cable with two Terminators.

What’s Included in the X4 PRO Pack:

• 1x Control X4 Unit
• 1x Control XP8 Unit
• 1x Temperature Sensor
• 1x pH Probe & Calibration Solutions
• 1x 6ft Command Bus Cable with two Terminators
• HYDROS App

OVERVIEW

• A single app controls a variety of different pumps from your mobile device. Access all the features you desire, without the need for multiple apps, individual controllers, and bulky power supplies that require a “bird’s nest” of cables and wires.
• Until now,  limited capabilities have restricted the simple controllers that manage popular pumps like the Maxspect Gyre, Reef Octopus Octo Pulse, TUNZE® Turbelle™ nanostream™, and EcoTech VorTech™ flow pumps.
• In addition to this convenient and advanced control, you can reduce clutter by eliminating the DC power brick used by modern controllable pumps!

OVERVIEW

• The WaveEngine LE allows you to easily add different brand pumps to your aquarium to obtain the ultimate flow.
• Specify the minimum and maximum speed each pump can run while working together in multiple flow presets such as sync, anti-sync, triangle wave, square wave, sine wave, and many other preset wave patterns.
• Connect up to two (2) pumps directly to the controller, removing multiple power bricks' clutter.**

HYDROS WiFi Fish Feeder is suitable for a variety of fish foods. Requires HYDROS Control and mobile device to operate sold separately.

CoralVue HYDROS Sense Port Accessory

The Slim Temperature Sensor Probe has a long 79” cord with a GX12 aviation-style connector that plugs into any Sense Port on the Control 2, Control 4, and future HYDROS devices.

PINPOINT® pH Replacement Probe Kit will have your pH meter or controller running like new again.

PINPOINT ORP Replacement Electrodes are designed especially with your purpose in mind. They feature a long, continuous duty expectancy, fast response and, most importantly, are non-toxic to your system. Each probe features a 10 foot cable with a high interference suppression jacket, Ag-AgCl reference, and the ORP probe is 99.9% pure platinum.

Finally, a 15 foot cable with the proper male/female BNC. This will add an extra 15 feet to your existing cable length. Can be used with any high quality pH or ORP/REDOX Electrode with a BNC Connector.

Use with pH 4 or pH 10 solutions for two point calibration.

PINPOINT High-Precision Calibration Fluids: 7.000 +/- 0.002. These come in plastic envelope packets and are extremely accurate and field portable. Each packet contains ample fluid for calibration (about 30 ml). All electronic pH instruments should be calibrated frequently.

For calibrating pH monitors for saltwater testing.

PINPOINT High-Precision Calibration Fluids: 10.000 +/- 0.005. These come in plastic envelope packets and are extremely accurate and field portable. Each packet contains ample fluid for calibration (about 30 ml). All electronic pH instruments should be calibrated frequently.

CoralVue HYDROS Rope Leak Sense Port Accessory

The HYDROS Rope Leak Detection Sensor is a flexible line that detects the presence of moisture anywhere along the rope. It can sense when freshwater or saltwater is underneath it and use that information to protect your aquarium, home, or office from total disaster.

CoralVue HYDROS 5-PIN System Command Bus Cable

This 6ft long HYDROS System Command Bus Cable allows HYDROS devices to communicate and even provide power to the Control 2 and Control 4.

HYDROS 9ft Drive 2-Pin Extension Cable

This 9ft long extension cable for HYDROS Drive Accessories for Control 2 and Control 4.

HYDROS Rope Link Extension Cable

This extension cable for HYDROS Rope LInk for Control 2 and Control 4.

HYDROS 3.5mm Adapter Cable

HYDROS Half U Clips for Rope Leak (10pack)

The CoralVue HYDROS Auto Top-Off Kit Includes: HYDROS Water Level Sensor (plugs into HYDROS Sense Port), HYDROS DC Micro Pump (plugs into HYDROS Drive Port), Hang-On Tubing Mount, Tubing & Siphon Break

HYDROS Sense Port Accessory

The HYDROS Water Level Sensor is an optical sensor you can use for a variety of aquarium applications, such as sensing when your tank needs to be topped off or to detect when a dosing container needs a refill. It plugs into any Sense Port on a HYDROS device (like the Control 2 or Control 4) and does not require any additional power source.

CoralVue HYDROS Sense Port Accessory

The HYDROS Skimmer Sensor serves a very specific and important role: it prevents your protein skimmer from overflowing onto the floor or back into your sump.

CoralVue HYDROS Sense Port Accessory

The HYDROS Leak Detection Sensor is a solid surface leak detector that can sense when freshwater or saltwater is underneath it and use that information to protect your aquarium, home, or office from total disaster.

HYDROS Sense Port Accessory

The HYDROS Magnet Mount Temperature Sensor is an easy and affordable way to prevent your aquarium water from becoming too cold or too hot. It monitors the water temperature in your aquarium so you can keep it within the safe zone for fish, coral, and inverts. The sensor plugs into any Sense Port on a HYDROS device (like the Control 2 or Control 4) and does not require any additional power source.

HYDROS DC Solenoid Water Valve - Drive Port Accessory

The HYDROS DC Solenoid Valve is a handy HYDROS Control 2 and Control 4 accessory that provides easy on/off RO or RO/DI water flow.

CoralVue HYDROS DC Micro Pump - Drive Port Accessory

Manufactured by AutoAqua, an official HYDROS Technology Partner.

The HYDROS DC CO2 Solenoid Valve is electronically controlled and plugs into a Drive Port on the Control 2 and Control 4 where it can be monitored and controlled via the HYDROS app.

HYDROS Reef Octopus Varios 2/4 & OctoPulse 2/4 WaveEngine Pump Adapter

HYDROS IceCap Gyre WaveEngine Pump Adapter

OVERVIEW

• This pump adapter allows the HYDROS WaveEngine to connect directly to the pump head of the Maxspect Gyre 130 and 230 Pump, removing the clutter of their power bricks and controlling them centrally.

OVERVIEW

• Some pumps do not lend themselves to direct drive control with the WaveEngine due to cabling or other restrictions, but many of these pumps do offer 0-10V controllability.
• This 0-10V HYDROS WaveEngine Quad Cable supplies four independent 0-10V outputs to control these pumps.

The HYDROS WaveEngine APX Link allows you to connect the WaveEngine's 0-10V input port directly to a Neptune Systems Apex aquarium controller (rather than using an outlet) so you can remotely control the WaveEngine from Apex Fusion.

OVERVIEW

• The HYDROS WaveEngine 0-10V Tunze Adapter is required to control Tunze pumps with the WaveEngine.
• You will also need a HYDROS WaveEngine 0-10V Quad Cable for this application.