Probes & Calibration Solutions
-
For calibrating pH monitors for freshwater testing.
PINPOINT High-Precision Calibration Fluids: 4.000 +/- 0.002. These come in plastic envelope packets and are extremely accurate and field portable. Each packet contains ample fluid for calibration (about 30 ml). All electronic pH instruments should be calibrated frequently.
5 -
Use with pH 4 or pH 10 solutions for two point calibration.
PINPOINT High-Precision Calibration Fluids: 7.000 +/- 0.002. These come in plastic envelope packets and are extremely accurate and field portable. Each packet contains ample fluid for calibration (about 30 ml). All electronic pH instruments should be calibrated frequently.
5 -
For calibrating pH monitors for saltwater testing.
PINPOINT High-Precision Calibration Fluids: 10.000 +/- 0.005. These come in plastic envelope packets and are extremely accurate and field portable. Each packet contains ample fluid for calibration (about 30 ml). All electronic pH instruments should be calibrated frequently.
5 -
53.0 S standardized fluid for calibrating the PINPOINT Salinity Monitor and for calibrating refractometers.34
-
45.0 S standardized fluid for calibrating the PINPOINT Conductivity Monitor39
-
PINPOINT® pH Replacement Probe Kit will have your pH meter or controller running like new again.
249 -
PINPOINT ORP Replacement Electrodes are designed especially with your purpose in mind. They feature a long, continuous duty expectancy, fast response and, most importantly, are non-toxic to your system. Each probe features a 10 foot cable with a high interference suppression jacket, Ag-AgCl reference, and the ORP probe is 99.9% pure platinum.
384 -
ORP/REDOX calibration fluid. With a precise measurement of 400mV this calibration fluid is included with every PINPOINT ORP Monitor and PINPOINT ORP Controller. Occasional retesting with this fluid will keep your readings dead-on accurate. Also very useful to determine if an ORP/REDOX probe is ready for replacement.20
-
Calibration solution for American Marine Calcium Monitor. Includes 100ppm solution, 1000ppm solution and electrode reference fill solution.94
-
This is the perfect fluid to keep the pH or ORP/REDOX probes wet and will extend their life during storage. 2 ounce bottle.49
-
Finally, a 15 foot cable with the proper male/female BNC. This will add an extra 15 feet to your existing cable length. Can be used with any high quality pH or ORP/REDOX Electrode with a BNC Connector.
179 -
-
PINPOINT II Oxygen Monitor Membrane Cap and Fluid Kit The Membrane Cap at the end of the probe should be changed when necessary to ensure optimum performance.849
-
PINPOINT II Oxygen Monitor Extension Cable A 4-meter extension cable for the oxygen probe.144
-
PINPOINT II Oxygen Monitor Membrane Cap and Fluid Kit The Membrane Cap at the end of the probe should be changed when necessary to ensure optimum performance.129
-
Complete New Probe Assembly for the PINPOINT Calcium Monitor. Includes fluid kit and element tip.999
-
-
-