Instructions and Guidelines

Read all instructions thoroughly. Do not overdose. Determine concentration of chloramines or chlorine in water prior to treating with Erāse-ClP. Be sure to measure ammonia with a test kit featuring ammonia salicylate reagent rather than Nessler's reagent; Nessler's reagent will give an incorrect positive reading of ammonia due to the manner in which the reagent interacts with the active components of Erāse-ClP.

One teaspoon is approximately equivalent to 5 grams of Erāse-ClP. Each gram of Erāse-ClP applied to 13 US-gallons (50 L) will neutralize up to 6 ppm chlorine (or 1 ppm in each 80 US-gallons or 300 L), 3 ppm chloramines (or 1 ppm in 40 US-gallons or 150 L), or 1 ppm ammonia. To neutralize nitrite and/or nitrate, apply 1 gram per 25 US-gallons and observe aquarium inhabitants for persistent signs of nitrite- and/or nitrate-related stress; allow at least one hour to pass, and re-apply if necessary.

To neutralize free iodine, apply 1 gram per 40 US-gallons and observe inhabitants for at least 15 minutes thereafter; signs of overdose include "drooping" and rapidly decaying tissue of corals, clams, their allies, and other sessile invertebrates, as well as erratic behavior and/or death of fishes and motile invertebrates. Erāse-ClP binds iodine at a rate that is limited only by the response time and degree of water circulation in the aquarium; the faster the product is added after an overdose and the more rapid the water circulation in the system, the better the product will perform. No claim is made that this product will prevent damage or reverse that which has already been suffered by livestock or biological filtration in any event. This product is particularly useful for reef aquarists employing Lugol's Solution and other strong iodine sources. Do not exceed a total iodine concentration of 0.10 ppm in a marine aquarium at any time.

Caution: Keep out of reach of children. Not for human consumption. Contact poison control center if ingested.