Instructions and Guidelines

Prior to first use, rinse under a stream of fresh water. Each 500g of Carbonīt-P is suited to efficiently filtering 450 US-gallons (1,703 L) of water. The method in which Carbonīt-P is employed will dictate reaction time with the water and consequently the rate at which organic material will be extracted; therefore, the greater the reaction time between carbon pellets and water, the faster this process will occur. In all cases, 

the use of a mechanical pre-filter to remove particulate organic material from water prior to its interaction with this media will prolong effectiveness. Follow guidelines for media use below; Carbonīt-P may be removed prior to reaching the maximum recommended filtering time if more than one use is desired. Hobbyist may choose to employ Carbonīt-P for 1 - 2 hours each day throughout the course of a 1-month period to help improve water quality. If used in this fashion, Carbonīt-P should be discarded and replaced at the conclusion of each month. In high-nutrient aquaria, replace after 24-hours of total use; placement in lower-nutrient aquaria may be extended up to 48-hours of total use.

Canister filtration: Load carbon into filter cartridge as directed by filter manufacturer. Slowing the flow of water through the filter may be required to obtain maximum effectiveness of carbon. 

Passive filtration: Place Carbonīt-P loosely in an 800μm mesh filter bag and locate in an area of low- to medium-flow. Turning bag over once during usage will serve to shift the carbon particles and increases effectivness of this method. 

Caution

Keep out of reach of children. Not for human consumption.