ESV
-
B-Ionic Calcium Buffer is the original, unique, easy to use, two-component liquid supplement system. When using equal volumes of each component, the aquarist can easily maintain calcium and alkalinity levels with no mixing powders
81 -
B-Ionic Calcium Buffer is the original, unique, easy to use, two-component liquid supplement system. When using equal volumes of each component, the aquarist can easily maintain calcium and alkalinity levels with no mixing powders
111 -
B-Ionic Calcium Buffer is the original, unique, easy to use, two-component liquid supplement system. When using equal volumes of each component, the aquarist can easily maintain calcium and alkalinity levels with no mixing powders
229 -
B-Ionic Calcium Buffer is the original, unique, easy to use, two-component liquid supplement system. When using equal volumes of each component, the aquarist can easily maintain calcium and alkalinity levels.
684 -
Calcium Chloride is a very pure anhydrous grade free of phosphates and nitrates. The advantage of using Calcium Chloride as a calcium supplement in marine aquaria is its very high solubility in water.113 -
Calcium Chloride is a very pure anhydrous grade free of phosphates and nitrates. The advantage of using Calcium Chloride as a calcium supplement in marine aquaria is its very high solubility in water.389
-
Calcium Hydroxide is the proven standard for maintaining calcium concentration and alkalinity in closed marine aquaria.73 -
Calcium Hydroxide is the proven standard for maintaining calcium concentration and alkalinity in closed marine aquaria.152
-
Calcium Hydroxide is the proven standard for maintaining calcium concentration and alkalinity in closed marine aquaria.778
-
Liquid Carbonate Buffer is useful for raising alkalinity in aquariums which already have high calcium concentrations (over 500 ppm) as it only raises alkalinity and does not supply calcium.107 -
Liquid Carbonate Buffer is useful for raising alkalinity in aquariums which already have high calcium concentrations (over 500 ppm) as it only raises alkalinity and does not supply calcium.62
-
B-Ionic Magnesium is an easy to use one component liquid supplement which, when used with B-Ionic Calcium Buffer or kalkwasser, will not disrupt the ionic balance of closed marine aquaria. B-Ionic Magnesium does not contain nitrates, phosphates, organics.68 -
B-Ionic Magnesium is an easy to use one component liquid supplement which, when used with B-Ionic Calcium Buffer or kalkwasser, will not disrupt the ionic balance of closed marine aquaria. B-Ionic Magnesium does not contain nitrates, phosphates, organics.192
-
Potassium Iodide Solution is a very pure form of iodide. Iodide is an important micro-nutrient for many marine plants. It has also been suggested that iodide may play an important role in enhancing a coral's ability to adapt to rapid changes in light.71 -
Potassium Iodide Solution is a very pure form of iodide. Iodide is an important micro-nutrient for many marine plants. It has also been suggested that iodide may play an important role in enhancing a coral's ability to adapt to rapid changes in light.394
-
Strontium Chloride Solution is a very pure and concentrated form of strontium, free of phosphates and nitrates. The aquarist should be aware that Strontium Chloride does not add bicarbonate and carbonate ions to the system.97 -
Strontium Chloride Solution is a very pure and concentrated form of strontium, free of phosphates and nitrates. The aquarist should be aware that Strontium Chloride does not add bicarbonate and carbonate ions to the system.493
-
-
-
Problem:
All dry blends may not be homogenous resulting in
considerable chemical variations not only from batch to batch but also from within the same container.
Aggravating this further, humidity contamination during storage can result in localized precipitation reactions.
Solution:
B-Ionic Seawater System avoids these problems by providing the two dominant salts in our formulation in separate
containers. All other major, minor, and trace elements are pre-dissolved in a highly concentrated two component
liquid system. These dry and liquid components can easily be measured for any size batch of synthetic seawater.
Problem:
It is now recognized that most reagent grade salts can contain contaminants (trace metals, etc.) at levels which
may inhibit the growth of some algae species from low nutrient environments (oligotrophic) such as coral reefs.
Solution:
B-Ionic Seawater System addresses this issue by providing ultra-low heavy metal Sodium Chloride (max. allowable
less than half max. allowable for reagent grade sodium chloride) and USP grade Magnesium Sulfate as the dry
components of the system. In addition, all other chemicals pre-dissolved in our liquid components are subject to our
three phase purification process resulting in significant lowering of contaminants, including phosphate.
Problem:
Many all dry blends take excessive time to completely dissolve. Addition of newly mixed batches to the aquarium
can cause irritation to inhabitants upon exposure to non-dissolved salt micro-particles.
Solution:
B-Ionic Seawater System avoids this problem by providing all of the slower dissolving ingredients in a pre-dissolved
solution form. Batches can be used within 10 minutes of preparation with no adverse effects providing initial RO and/or
DI water contains sufficient dissolved oxygen.999 -
Calcium Chloride is a very pure anhydrous grade free of phosphates and nitrates. The advantage of using Calcium Chloride as a calcium supplement in marine aquaria is its very high solubility in water.588
-
-
Free
Problem:
All dry blends may not be homogenous resulting in
considerable chemical variations not only from batch to batch but also from within the same container.
Aggravating this further, humidity contamination during storage can result in localized precipitation reactions.
Solution:
B-Ionic Seawater System avoids these problems by providing the two dominant salts in our formulation in separate
containers. All other major, minor, and trace elements are pre-dissolved in a highly concentrated two component
liquid system. These dry and liquid components can easily be measured for any size batch of synthetic seawater.
Problem:
It is now recognized that most reagent grade salts can contain contaminants (trace metals, etc.) at levels which
may inhibit the growth of some algae species from low nutrient environments (oligotrophic) such as coral reefs.
Solution:
B-Ionic Seawater System addresses this issue by providing ultra-low heavy metal Sodium Chloride (max. allowable
less than half max. allowable for reagent grade sodium chloride) and USP grade Magnesium Sulfate as the dry
components of the system. In addition, all other chemicals pre-dissolved in our liquid components are subject to our
three phase purification process resulting in significant lowering of contaminants, including phosphate.
Problem:
Many all dry blends take excessive time to completely dissolve. Addition of newly mixed batches to the aquarium
can cause irritation to inhabitants upon exposure to non-dissolved salt micro-particles.
Solution:
B-Ionic Seawater System avoids this problem by providing all of the slower dissolving ingredients in a pre-dissolved
solution form. Batches can be used within 10 minutes of preparation with no adverse effects providing initial RO and/or
DI water contains sufficient dissolved oxygen.499 -
-
B-Ionic Transition Elements is the latest product by ESV, formulated by Bob Stark in collaboration with Joe Yaiullo. B-Ionic TE provides daily replenishment of the transition elements iron, manganese and zinc. These elements can rapidly deplete in the reef aquaria, due to the biological and abiological processes. In addition, B-Ionic TE may potentially mitigate the release of hydrogen sulfide within the aquarium, and enhance the removal of soluble phosphate. B-Ionic Transition Elements can be used with and may enhance various forms of organic carbon dosing. Also, enhanced coral coloration, better polyp extension, and enhanced macro algae growth have been observed with the use of B-Ionic TE. This product has been formulated to prevent accumulation of the transition elements it provides. Try our B-Ionic Transition Elements Plus+, which combines carbon dosing with the benefit of this product.
Directions: For the first week, dose 1ml/40 gallons (1 drop per 2 gallons) daily. After first week, increased dose to 1ml/ 20 gallons (1 drop per gallon) daily. When adding full dose at once, add within the first few hours of photoperiod. When using dosing pump, add entire dose only when aquarium lights are on.
294 -
B-Ionic Transition Elements is the latest product by ESV, formulated by Bob Stark in collaboration with Joe Yaiullo. B-Ionic TE provides daily replenishment of the transition elements iron, manganese and zinc. These elements can rapidly deplete in the reef aquaria, due to the biological and abiological processes. In addition, B-Ionic TE may potentially mitigate the release of hydrogen sulfide within the aquarium, and enhance the removal of soluble phosphate. B-Ionic Transition Elements can be used with and may enhance various forms of organic carbon dosing. Also, enhanced coral coloration, better polyp extension, and enhanced macro algae growth have been observed with the use of B-Ionic TE. This product has been formulated to prevent accumulation of the transition elements it provides. Try our B-Ionic Transition Elements Plus+, which combines carbon dosing with the benefit of this product.
Directions: For the first week, dose 1ml/40 gallons (1 drop per 2 gallons) daily. After first week, increased dose to 1ml/ 20 gallons (1 drop per gallon) daily. When adding full dose at once, add within the first few hours of photoperiod. When using dosing pump, add entire dose only when aquarium lights are on.
86 -
B-Ionic Transition Elements PLUS+ is the latest product by ESV, formulated by Bob Stark in collaboration with Joe Yaiullo. B-Ionic TE Plus+ changes the nutrient dynamics of reef aquarium without the use of specialized chemical media. It provides a conservative level of organic carbon, synergistically combined with trace elements to maximize heterotrophic bacteria uptake of nitrate and phosphate. B-Ionic TE Plus+ can also provide many potential benefits such as enhanced production of marine snow, and mitigation of any hydrogen sulfide release within the aquarium. Also, also enhanced coral coloration, polyp extension, macro algae growth, and increased water clarity have been observed with the use of B-Ionic TE Plus+. This product has been formulated to prevent accumulation of the transition elements it provides.
Directions: If Nitrate concentration is less than 5ppm, or falls below 5ppm while using B-Ionic TE Plus+, use B-Ionic TE instead. For the first week, dose 1ml/40 gallons (1 drop per 2 gallons) daily. After first week, increased dose to 1ml/ 20 gallons (1 drop per gallon) daily. When adding full dose at once, add within the first few hours of photoperiod. When using dosing pump, add entire dose only when aquarium lights are on. Do not use B-Ionic TE Plus+ when using other forms of organic carbon dosing, use our B-Ionic Transition Elements instead.
339 -
B-Ionic Transition Elements PLUS+ is the latest product by ESV, formulated by Bob Stark in collaboration with Joe Yaiullo. B-Ionic TE Plus+ changes the nutrient dynamics of reef aquarium without the use of specialized chemical media. It provides a conservative level of organic carbon, synergistically combined with trace elements to maximize heterotrophic bacteria uptake of nitrate and phosphate. B-Ionic TE Plus+ can also provide many potential benefits such as enhanced production of marine snow, and mitigation of any hydrogen sulfide release within the aquarium. Also, also enhanced coral coloration, polyp extension, macro algae growth, and increased water clarity have been observed with the use of B-Ionic TE Plus+. This product has been formulated to prevent accumulation of the transition elements it provides.
Directions: If Nitrate concentration is less than 5ppm, or falls below 5ppm while using B-Ionic TE Plus+, use B-Ionic TE instead. For the first week, dose 1ml/40 gallons (1 drop per 2 gallons) daily. After first week, increased dose to 1ml/ 20 gallons (1 drop per gallon) daily. When adding full dose at once, add within the first few hours of photoperiod. When using dosing pump, add entire dose only when aquarium lights are on. Do not use B-Ionic TE Plus+ when using other forms of organic carbon dosing, use our B-Ionic Transition Elements instead.
114 -
-
Free
Problem:
All dry blends may not be homogenous resulting in
considerable chemical variations not only from batch to batch but also from within the same container.
Aggravating this further, humidity contamination during storage can result in localized precipitation reactions.
Solution:
B-Ionic Seawater System avoids these problems by providing the two dominant salts in our formulation in separate
containers. All other major, minor, and trace elements are pre-dissolved in a highly concentrated two component
liquid system. These dry and liquid components can easily be measured for any size batch of synthetic seawater.
Problem:
It is now recognized that most reagent grade salts can contain contaminants (trace metals, etc.) at levels which
may inhibit the growth of some algae species from low nutrient environments (oligotrophic) such as coral reefs.
Solution:
B-Ionic Seawater System addresses this issue by providing ultra-low heavy metal Sodium Chloride (max. allowable
less than half max. allowable for reagent grade sodium chloride) and USP grade Magnesium Sulfate as the dry
components of the system. In addition, all other chemicals pre-dissolved in our liquid components are subject to our
three phase purification process resulting in significant lowering of contaminants, including phosphate.
Problem:
Many all dry blends take excessive time to completely dissolve. Addition of newly mixed batches to the aquarium
can cause irritation to inhabitants upon exposure to non-dissolved salt micro-particles.
Solution:
B-Ionic Seawater System avoids this problem by providing all of the slower dissolving ingredients in a pre-dissolved
solution form. Batches can be used within 10 minutes of preparation with no adverse effects providing initial RO and/or
DI water contains sufficient dissolved oxygen.629 -
